Interior Wall

Home > Interior Wall

Interior Wall Primer is an acrylic, water based protective primer specially formulated to give better adhesion on the surface with excellent interior adhesion. It is perfect sealer on exceptionally porous surfaces and protects subsequent coats of paints. And allows the finish coat to develop a full and consistent sheen and offers exceptional ability to maintain top-coat gloss.


It is a great base to the top coat of interior cement plaster, concrete, fibre cement etc that extends the life of entire paint surfaces.


Formulated for wide range of interior surfaces.

Forms the surface that improves the workability and durability of top-coats.

Quick and easy application with great hiding power.

Seals porous surfaces.

Improves the adhesion of subsequent coats of paints.

Improves the performance of acrylic top-coats.

It reduces the ultimate cost of paint due to low paint absorption.

Provides outstanding finished result


The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth of average porosity
11-12 /Ltr. /coat.

Drying Time

HD: –4 –5 Hours
SD: – 30-60 minutes
Drying times may vary depending on temperature, humidity, air movements and film thickness.

No. of Coats: Apply double coats.

Finish: Matte

Thinning: Dilute paint in the ratio of 2:1

300% Team Player

Recommended Tools: 1. Brush 2. Spray

Cleaning Up: Clean all equipment with water after use.

Surface Preparation

Clean the surface free of dust, dirt, rust, grease and other loose particles with abrasive paper.

Brush down previously painted surface completely and make the surface smooth.

Fill the surface cavities if there is any and level the surface.

Treat areas affected by fungus/microbial growth with a fungicidal solution. And make sure it is completely dry

Application Instructions

For better result stir the contents well before use

For the thinnable primer use water.

Use clean water to adjust its viscosity.

Use double coats, the last should be applied only after the first has dried hard

Keep the container sealed when not in use